BL-212 Electric ATV, 250 Watt
Description
Send to friend
Reviews
Engine: 250 Watt Electric Engine that runs for about 1 hour straight on a single charge. If it is used on and off, obviously it can run 1 or 2 days on a single charge. No noise. Very neighborhood friendly.
Transmission: Fully Automatic. No learning curve, just get on, twist the throttle with your right hand and go. With the automatic transmission, it is easy to share with friends.
Charging the unit: Simply plug the included charger into any regular wall socket and into the charging port on the electric atv. A full charge takes 3 to 6 hours. When the light goes out on the electric charger, the unit is done charging and ready to ride.
Safety:
Brush Guard: Front bumper that protects ATV in the event of a frontal impact.
Chain Guard: Metal covering over the top of the chain.
Extra Large Disc Brake: For faster stopping
Speed: Up to 6 mph
Drive train: 2-wheel, chain drive
Starter: Electric start with key
Front Suspension: Dual Coil Spring Shocks
Rear Suspension: Rear mono shock for smooth riding.
Brakes: Hydraulic disc brake controlled from handle.
Tires - Rubber not plastic like cheap chain store toys:
Front: 9.75" x 4" x 3"
Rear: 9.75" x 4" x 3"
Body: UV resistant Injection Molded body and not fiberglass (fiberglass cracks).
Frame: all gig welded frames using thick 16 gauge steel.
Ground Clearance: 4". Unlike cheaper ATV's, this unit has a protective metal skid plate under the rear disk brake and chain. Without this, any objects passing between the wheels can easily damage the rear brakes.
Dimensions: 42" x 25" x 24" (Total Length x Width x Handle bar height)
Seat Height: 18"
Seat Length: 14" (much smaller than others).
Distance from foot rest to top of seat: 13"
Foot rest length: 12"
Seat: Waterproof Polyurethane Vinyl.
Weight of unit: 70 pounds.
Weight Capacity: (Manufacturer's allowable rider weight): 132 pounds.
Other features: Owners manual, assembly tools, battery charger.
Other controls: Battery gauge lets you know when you need to recharge.
Assembly: Usually takes about 30 to 45 minutes. The ATVs are completely assembled in the factory and fully tested. After testing, the tires, battery, fenders, front bumper, and the handle bars are removed. So to assemble, put these items back on. The handle bar assembly goes back on with just a bracket and four bolts. You will need some means to elevate the unit while the tires are put on.
Maintenance: All they need to do is to call us up and we can furnish the parts needed.
No posts found
Add new post